Dust Control During A Renovation Project
Installing or sanding drywall and replacing ceiling tiles may generate a lot of dust inside of a residence. Dust control strategies should be planned in advance. Interior protection systems include polyethylene products that can be used to create a dust barrier.
Polyethylene sheeting is flexible and flame-resistant. Its antimicrobial and antistatic properties make it an ideal material for use in confined areas where dust may accumulate. Poly sheets can be used as protective barriers indoors or outdoors. The protective material clings to surfaces and will remain more stable than a tarping system.
Duct tape or staples are commonly used to secure polyethylene sheets. Some containment wrap systems include temporary poles, frames, and zippered access points. Dimensions of the area where renovations will be made should be calculated. The calculations will determine what type of containment wrap system to use to protect the ceiling, walls, and flooring.
One Point Of Entry, Ventilation, And Dust Collection
Demolition and construction debris will accumulate quickly within a confined space. During the planning of a project, one point of entry should be assigned for workers to use. Omitting the use of multiple doors will limit the amount of dust that is tracked through a home. After picking a direct pathway to and from the area where renovations are going to be made, containment wrap systems should be installed.
Wraps should be laid out smoothly and seams should be covered in their entirety. A poly system that contains a zippered opening will omit the need to open and close the door that is going to be used as an access point. As workers enter or exit the project area, they can unzip and zip the poly sheet.
A ventilation setup will reduce the amount of dust that workers breathe in. A box fan should be set up in a window. The fan will blow dust particles outdoors. Although ceiling, wall, and floor protection systems will prevent dust from entering other rooms inside of a home, manual dust collection efforts should be conducted daily. A shop vacuum can be used to collect dust particles that have settled on polyethylene-covered surfaces.
Dust control should include monitoring the usage of heavy-duty machinery within a confined area. If construction materials can be cut or sanded outdoors, all efforts should be made to do so. Once a renovation project is complete, poly materials can be removed from interior surfaces and folded up. For more information regarding interior ceiling debris containment wraps, contact a manufacturer.