Heating Options For Your Shop Or Warehouse Space

In many parts of the country, winter weather means turning the heat on to keep it warm inside. Working in a large, open space like a warehouse or shop can present some challenges when it comes to heating the space. Heating a large, open space like that is not necessarily about the product in the warehouse, but more about keeping the space comfortable enough for people to work in. But what is the best way to do that?

Assessing the Space

When you are considering adding a heating system to a large, open space, like a warehouse that holds your product or a shop where production work is being done, you have to look at the size of the space, the construction of the building, and just how much heat you need in it. There are some spaces that present challenges simply because of what they are, not how they are constructed. For instance, a shipping dock, where the doors are opened and closed regularly, can present you with a problem because the cold coming in through the doors will often lower the temperature on the dock very quickly. There are some options that can help keep the cold out and the heat in, so take some time to look at these with your heating contractor.

Picking A System That Will Work For You

Once you have taken a look at the space and the use of it, bring in a commercial heating contractor and go over the building with them. Show them all your areas of concern and then ask them to make some recommendations for heating options in the building. Not too long ago, the recommendation for a space like this would be to hang some hot air heaters from the ceiling, power them with natural gas, and set them up to turn on and off at a specific temperature. These gas heaters are still used in some buildings -- and they can still be very effective -- but there are other options now as well.

Heating With Hot Water

Just like in many homes, the option for a boiler to heat your work space could be the best option. If you can place the baseboards or radiators in the building and keep them from getting damaged by forklifts and other indoor equipment, the efficiency of the boiler might be the best way to go. In areas of high traffic they can be placed along a wall and then protected by posts or barriers to keep them from getting hit. They are still controlled with a thermostat, and the system can be set up with zones so the temperature in an office space is not overpowering and the temperature on the loading dock or production floor is comfortable.

For more information about setting up your commercial heating, visit sites like http://www.mercurytecinc.com.


Share